MESAUDA MNP STARLIGHT 48W UV/LED lamp
Pay in 3X or 4X installments with Alma
Pay in installments with our partner ALMA, immediate response. More information >
STARLIGHT MNP 48 Watt UV/LED lamp from Mesauda Milano, compatible with all gels, semi-permanent varnishes and polyacrylic gels. Removable bottom tray for feet.
Features 30 strategically positioned LEDs and a removable mirror-effect bottom tray that allows complete catalysis of gel, semi-permanent varnish and polyacrylic gel, even from below, by reflecting the light.
Dimensions: 150 x 190 x 85mm
When using the lamp for the first time, remove it from its carton, along with its protective pouch and the power cable. Unhook the lower tray from the lamp by pulling it downwards and remove the blue protective film from the lower tray, then replace the lower tray on the lamp.
Connect your lamp to the socket and then to the mains.
5 operating modes:
- Detection mode: Insert your hand under the lamp, which lights up automatically. The lamp stays on as long as the hand is inside and switches off automatically when the hand is removed;
- 24 Watt mode: Press the ON/OFF button and the lamp lights up in 24 Watt mode for 1 minute;
- 5-second mode: Press the 5S button then insert your hand. The lamp switches off after 5 seconds;
- 30 second mode: Press the 30S button then insert your hand. The lamp will turn off after 30 seconds;
- 60-second mode: Press the 60S button then insert your hand. The lamp switches off after 60 seconds;
The lamp is very easy to clean with the UV Gel Cleanser to remove traces of gel or semi-permanent varnish. Remove the lower tray and clean it with the UV Gel Cleanser. If traces remain, you can use a blade to remove them. Be careful not to scratch the bottom tray with your blade. Then disinfect everything with a sanitising wipe.